Aqua Grantique™ Sawn Heights
100% split-face. Dark slate and dusty blue that may contain areas of olive, white quartz, and rust.
The ends are sawn, irregular, and split.
If there are many full veneer corners on your project you may need to order corners pieces separately with an additional fee.
This product is typically a 50/50 blend of Aqua Grantique™ 3½" and 7½” Sawn Heights. If taller jumper heights are desired usually 10% of the 11½” is blended in. The ends of these stones are sawn, some naturally broken and/or sawn at an irregular angle. We can provide all square ( +/-) sawn ends- to provide this the cost is double and the pieces are then much shorter. There would be an extended lead time. The taller 11 ½” material has much irregularity on the face, it becomes very concave/convex after splitting and may exceed 5” in depth. The Aqua Grantique is a metamorphic stone and very unforgiving in production. The Aqua Grantique is a very dense stone and piece can be heavier than 15 pounds per SF in TV form, additional support may be needed. A dark mortar enriches the end result.
Thin Veneers (TV)
¾” to 1½” depths
3½”, 7½”, and/or 11½" (+/- ½”) sawn height
6” to 22”+ lengths
average weight 12-18+ pounds per SF
additional support may be needed
TV is packaged 3 ways:
full pallet flats contain a random range of 252 to 330 sf
crates are 100 sq ft of flats or 100 LF of corners
handy packs include 5 sq ft of flats, the 3½" height corners contain 10 LF and the 7½" & 11½" height corners contain 8 LF
Full Veneers (FV)
3" to 5” depths
3½”, 7½”, and/or 11½" (+/- ½”) sawn heights
6” to 30”+ lengths, most common 10” to 20”
Covers approx. 30-32 SF per ton
FV is packaged on pallets that are random weights of approximately 4,000 (3,500-4,500) pounds each.
Disclaimer: The Aqua Blue™ and Aqua Grantique™ materials contain minerals that on rare occasion may bleed.
3 ½" Sawn Height
3 ½" Sawn Height
3 ½" Sawn Height
One-Third 3 1/2" and Two-Thirds 7 1/2"
3 ½" Sawn Height
3 ½" Sawn Height
3 ½" Sawn Height
3 ½" Sawn Height
3 ½" Sawn Height
3 ½" Sawn Height
3 ½" Sawn Height used as pavers
3 ½" Sawn Height -installed vertically
3 ½" Sawn Height -installed vertically
3 ½" Sawn Height, black mortar used, accented with Aqua Grantique brushed panesl, mantle and hearth
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height, with sawn 2-1/4" Aqua Grantique sawn cap
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
7½" Sawn Height with Aqua Blue boulder accents
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" & 11 ½" Sawn Height *This project was produced with all sawn ends
3 ½", 7½", & 11 ½" Sawn Height *This project was produced with all sawn ends
3 ½", 7½", & 11 ½" Sawn Height *This project was produced with all sawn ends
3 ½", 7½", & 11 ½" Sawn Height *This project was produced with all sawn ends
3 ½", 7½", & 11 ½" Sawn Height *This project was produced with all sawn ends
3 ½", 7½", & 11 ½" Sawn Height *This project was produced with all sawn ends
7½", & 11 ½" Sawn Height *This project was produced with all sawn ends
7½", & 11 ½" Sawn Height *This project was produced with all sawn ends
7½", & 11 ½" Sawn Height *This project was produced with all sawn ends
7½", & 11 ½" Sawn Height *This project was produced with all sawn ends. The landscaping features Aqua Grantique 7 1/2" Outcropping.
7½", & 11 ½" Sawn Height *This project was produced with all sawn ends. The landscaping features Aqua Grantique 7 1/2" outcropping.
11 ½" Sawn Height *This project was produced with all sawn ends
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
3 ½" & 7½" Sawn Height
