Chestnut™ Ashlar
Chestnut™ Ashlar is split into random strips from Chestnut boulders, weathered edge and bed face. The coloring of this product is medium to dark brown chocolate and coffee tones.
With the Chestnut Ashlar full veneer the areas where the stone is split into an ashlar is the Sandy Creek color. Make sure the mason installs the correct dark Chestnut face out in the full veneer.
The Chestnut material is a fieldstone boulder located in the topsoil where it pulls its rich coloring. The Chestnut was tumbled and turned with the glacier giving them a smooth exterior texture. Some of the coloring in the Chestnut can cross-over into the Highland Brown color and vice-versa.
Thin Veneers (TV)
¾" to 1½" depths
3” to 8”+ heights
6” to 22”+ lengths
average weight is 11-14 pounds per sq ft
TV is packaged 3 ways:
full pallet flats contain a random range of 252 to 330 sf
crates are 100 sq ft of flats or 100 LF of corners
handy packs are 5 sq ft of flats or 10 LF of corners
Please Note: The TV handy pack of flats and corners are pre-blended. The 100 sq ft crates of flats and 100 LF of corners are not pre-blended, nor are the full pallets of flats.
Full Veneers (FV)
3" to 5" depths
3” to 8”+ heights
6” to 24”+ lengths
covers 40-45 sq ft per ton
FV is packaged on pallets that are random weights of approximately 4,000 (3,500-4,500) pounds each.
Please Note: The FV pallets are not pre-blended. This product will be shipped on separate pallets and needs to be blended on site by the mason as it is laid. If necessary we can blend the product; there is an additional blending fee. Please plan on ample lead time.
